DEI-NyTrex-eBay

http://www.kmjent.com/images/DEI/DEI_FlameGlobe_wTTP_TAG_posCS1.jpg

DEI Ny-Trex Systems & Kits
The Ny-Trex brand delivers a unique and progressive approach to the advancement of nitrous technology by changing the nitrous market with products that make sense in both form and function. In reinventing nitrous delivery, Design Engineering, Inc. (DEI) questions every aspect of current nitrous systems by starting with a clean slate and modern technology. Everything has been rethought from oxygen-sterilized bottles to the "T-Rex" 70° cone-effect delivery nozzles.		The newly designed "Triple Threat Tri-Valve" proves to be the gold standard for an efficient, clean system install. Ny-Trex Systems are the most installer-friendly products in today's nitrous market, incorporating everything necessary for a complete and professional set-up. The detailed instruction manuals, provided with each kit, explain every step of the installation process and help with fine-tuning your Ny-Trex system for maximum performance, reliability and safety.

NEW Typhoon Turbine
The Typhoon Turbine System makes ordinary nitrous systems extra-ordinary! Its unique design efficiently improves the delivery of nitrous into the intake system by utilizing the high pressure released during nitrous activation to drive the turbine and create positive force - in the same way that a turbo uses exhaust force to drive the turbo. The result is an improved spray pattern plus a mild boost force that greatly improves horsepower and torque efficiency over typical EFI single nozzle systems. When N²O is not in use, the “Passive Mode” allows passing air to spin the turbine freely - creating a swirl effect of air entering the throttle body for improved air flow.
Improves horsepower efficiency of existing single nozzle nitrous injection system as much as 15%, increases torque 20% or more. Implements a directional injection nozzle that can be angled to control the speed. Has ability to utilize a Y mixer nozzle to introduce both force media (air/N²O) and catalyst media (fuel, alcohol or methanol).	Unique design utilizes high pressure nitrous or pressurized air to drive the turbine to create positive induction force. The injection nozzle provides different size orifice jets to control the flow rate of force media (air/N²O). Installs easily within minutes to any aftermarket cold air pipe system
Part #	Description
DEI 150000	3" Typhoon Turbine
DEI 150001	2½" Typhoon Turbine
DEI 110000	Complete Typhoon Tank & Installation Kit

NOTE: Nozzle and feed lines are not included.

NEW Split-Shot Viper Dual Nozzle System
	DEI's Ny-Trex Split-Shot nitrous systems are designed to deliver massive horsepower with a unique Split-Shot valve that is capable of 700 hp of nitrous flow. The high flow design uses a unique plunger that reduces internal pressure and allows for increased orifice size (.180), greater bottle pressures (up to 1,250 psi) and will draw as little as 3 amps. Typical valve orifice size is much smaller (.125), operates only to 1,000 psi and draws up to 25 amps. Ny-Trex Split-Shot Viper Dual Nozzle Systems utilize 2 Hi-Flo T-Rex Injector nozzles installed between the MAF and dual throttle bodies. The T-Rex spray nozzle has a unique 110° swirl cone spray pattern to inject both nitrous and fuel precisely into the intake manifold. Horsepower gain is adjusted by changing the jet sizes to the desired hp level.
	Complete Systems Include:
	Dual T-Rex Nozzles Split-Shot Valve System Billet Solenoid Brackets Adjustable hp Jetting Braided stainless lines Switch controls, relay & wiring	Quick-Clamp stainless bottle brackets Chrome Hi-Flo 660 bottle valve w/gauge port 10 lb Wet-Black powder coated bottle Hose, clamps, ties, fittings, sealant Brackets, hardware, drill, tap, bolts Easy “Step-By-Step” instruction book
	Part #	Description
	DEI 110023	Split-Shot Viper Dual Nozzle System - Dual T-Rex Nozzles, 10 lb. bottle, Split-Shot Dual Outlet Valve, Wet, 150, 200, 250, 300, 350, 400 hp Jetting

Triple-Threat Systems
Ny-Trex is proud to introduce the next phase of nitrous innovation, the Triple-Threat wet nitrous system. This system combines all three valve functions: Purge, N²O and fuel in one easy to mount assembly. Triple-Threat is a precision machined billet body with three integral solenoid valves and Volt-Trap coils for a dependable, clean, all-in-one nitrous system. Ny-Trex systems use only high- quality components to produce the best looking, top performing and most reliable wet systems. To ensure safe and reliable performance, all systems are thoroughly dyno-tested on numerous vehicles.			DEI 110025 & 110026 DEI 110027 DEI 110029
Special Features:
Exclusive T-Rex Nozzle w/true-blend spray bowl delivers a swirl cone plume at a 110° angle to center throttle body for an even blend. Flows up to 300+hp yet works great as low as 35 hp. Solenoid valves are made with Volt-Trap coils for stronger, more efficient power, allowing for larger orifice, more flow. Works with as low as 9 volts. Plungers are made of high-grade alloy with greater tolerances to prevent sticking. The N²O seal is made of Teflon, and a special Viton seal is used for fuel. Dual Taper Jets provide a consistent flow of nitrous and fuel, w/a large array of sizes available. Easy install components such as well nuts to install bottle topside, drill bit and tap for fuel connection, Teflon sealant and easy install Quick-Guide.
Complete Systems Include:
10lb Wet-Black powder coated bottle Liquid Filled Bottle Gauge Fuel Pressure Safety Switch Adjustable hp jetting 15A WOT micro switch Drill & tap, fittings, sealant Mounting hardware, brackets, bolts, screws, clamps & ties	T-Rex Nozzle & adapter (up to 300+hp) Chrome 660 Hi-Flo valve with gauge port Braided/stainless N²O feed line w/Teflon core Two 22”x-3 braided stainless nozzle lines Quick-Clamp stainless bottle brackets Complete Purge System with V-Spray Electrical components, wire connectors, relays & switches
Part #	Triple-Threat Systems	Description
DEI 110025	4 & 6 Cyl EFI Wet Nitrous Kit	Triple-Threat Valve, Purge, Fuel Safety, 10 lb Bottle, Pressure Gauge, Single Nozzle, 35, 50, 75, 100hp Jetting
DEI 110026	V8 EFI Wet Nitrous Kit	Triple-Threat Valve, Purge, Fuel Safety, 10 lb Bottle, Pressure Gauge, Single Nozzle, 50, 75, 100, 125, 150hp Jetting
DEI 110027	V8 Spray-Plate Nitrous Kit	Triple-Threat Valve, Purge, Fuel Safety,10 lb Bottle, Pressure Gauge, 4150 Holley Square Bore Carburetor, Single 80 Hole Plate, 75, 100, 125, 150, 175hp Jetting
DEI 110029	Mustang S197 (05+) EFI Wet Nitrous Kit	Triple-Threat Valve, Purge, Fuel Safety, 10 lb Bottle, Pressure Gauge, Single Nozzle, 50, 75, 100, 125, 150hp Jetting

Carburated Systems
DEI 110016 DEI 110018 & 110020 DEI 110006	Give your carburated engine a shot in the arm with one of these DEI Ny-Trex Spray-Plate Systems. Spray-Plate nitrous system kits use the highest-quality material and precision-machined components to create BIG horsepower, good looks and the most reliable carburated V8 plate system around. Ny-Trex Carburated Systems utilize a machined billet injector plate that is installed between the carburetor and manifold. High-grade stainless spray bars have 80 laser drilled discharge holes (96 for Dominator) that inject both nitrous and fuel precisely into the intake manifold.
	Special Features:
	Spray-Plates made of 6061 billet with laser-drilled stainless spray bars featuring 80 holes for standard flange Holley 4150 and 96 for the Dominator plate. More holes provide greater hp with less nitrous freeze. Solenoid valves are made with Volt-Trap coils for stronger, more efficient power, allows for larger orifice, more flow and works with as few as 9 volts and have a lifetime warranty. Plungers are made of high-grade alloy with greater tolerances to prevent sticking. The N²O seal is Teflon and a special Viton seal is used for the fuel. Dual Taper Jets provide a consistent flow of nitrous and fuel, w/a large array of sizes available. Easy install components such as well nuts to install bottle topside, carb studs, plate gaskets, Teflon sealant and easy install Quick-Guide.
	Complete Systems Include:
	10 lb Wet-Black powder coated bottle Adjustable hp jetting Precision machined laser-drilled spray plate Chrome Hi-Flo 660 bottle valve w/gauge port Mounting hardware, brackets, bolts, screws, clamps & ties Braided/stainless N²O feed line w/Teflon core		15A WOT micro switch Quick-clamp stainless bottle brackets Two braided stainless plate lines Fittings, gaskets, carb studs & sealant Electrical components, wire connectors, relays & switches Lifetime Warranty on solenoids
	Part #	Carburated Systems	Description
	DEI 110016	Hot-Shot 4150 Spray-Plate Nitrous Kit	4150 Holley Square Bore Carburetor, 10 lb Bottle, .080 Hot-Shot Valve, Single 80 Hole Plate, Wet, 75, 100, 125, 150, 175hp Jetting
	DEI 110018	Phat-Shot 4150 Spray-Plate Nitrous Kit	4150 Holley Square Bore Carburetor, 10 lb Bottle, .125 Phat-Shot Valve, Single 80 Hole Plate, Wet, 100, 150, 200, 250, 300hp Jetting
	DEI 110020	Phat-Shot 4500 Spray-Plate Nitrous Kit	4500 Holley Dominator Carburetor, 10 lb Bottle, .125 Phat-Shot Valve, Single 80 Hole Plate, Wet, 100, 150, 200, 250, 300hp Jetting
	DEI 110006	Bare-Bones 4150 Economy Spray-Plate Nitrous Kit	4150 Holley Square Bore Carburetor, 10 lb Bottle, .080 Hot-Shot Valve, Single Economy Plate, Wet, 75, 100, 125, 150, 175hp Jetting

Split-Shot Systems
Ny-Trex Split-Shot nitrous systems are designed to deliver massive horsepower using a unique Split-Shot valve capable of 700 hp nitrous flow. This high-flow design uses a unique plunger that reduces internal pressure and allows for increased orifice size (.180), greater bottle pressures (up to 1,250 psi) and will draw as little as 3 amps. Typical valve orifice size is much smaller (.125), operates only to 1,000 psi and draws up to 25 amps. Split-Shot Dual Spray-Plate Systems utilize a 1” thick machined billet injector plate installed between carburetor and intake manifold. Spray bars have 160 laser drilled discharge holes (192 for Dominator) that inject both nitrous and fuel precisely into the intake manifold. Horsepower gain is adjusted by changing jet sizes to desired hp level.			DEI 110021 DEI 110022
Special Features:
Solenoid valves are made with Volt-Trap coils for stronger, more efficient power, allows for larger orifice, more flow and works with as low as 9 volts. Plungers are made of high-grade alloy with greater tolerances to prevent sticking. The N²O seal is Teflon and a special Viton seal is used for the fuel. Dual Taper Jets provide a consistent flow of nitrous and fuel, w/a large array of sizes available. Easy install components such as well nuts to install bottle topside, carb studs, plate gaskets, Teflon sealant and easy install Quick-Guide.
Complete Systems Include:
Billet Dual Spray-Plate, 160 holes for std. Holley Square Bore Carburetor (4150), 192 holes for Dominator (4500, up to 700hp) Chrome Hi-Flo 660 bottle valve w/gauge port 10 lb Wet-Black powder coated bottle Quick-Clamp stainless bottle brackets Switch controls, relay & wiring		Adjustable hp jetting Braided stainless lines Hose, clamps, ties, fittings & sealant Brackets, hardware, drill, tap & bolts Easy “Step-By-Step” instruction book Billet solenoid brackets Lifetime Warranty on solenoids
Part #	Split-Shot Systems	Description
DEI 110021	Split-Shot 4150 2X Bar Nitrous Kit	4150 Holley Square Bore Carburetor, 10 lb Bottle, 180 Split-Shot Dual Outlet Valve, Dual Cross Bar 160 Hole Plate, Wet, 150, 200, 250, 300, 350, 400hp Jetting
DEI 110022	Split-Shot 4500 2X Bar Nitrous Kit	4500 Holley Dominator Carburetor, 10 lb Bottle, 180 Split-Shot Dual Outlet Valve, Dual Cross Bar 192 Hole Plate, Wet, 150, 200, 250, 300, 350, 400hp Jetting

EFI Wet Nitrous Systems
DEI 110010 & 110012 DEI 110015 DEI 110005	Ny-trex is proud to offer the all new EFI 4, 6 and 8 cylinder wet nitrous systems. DEI's Ny-Trex EFI wet nitrous systems use only the highest-quality materials and components to produce the best looking, top performing, and most reliable wet systems around. These Ny-Trex systems have many of the great features offered in top-of-the-line systems and have been throughly dyno-tested on numerous vehicles to ensure the most safe and reliable performance possible at any price.
	Special Features:
	Exclusive T-Rex Nozzle w/true-blend spray bowl delivers a swirl cone plume at a 110° angle to center throttle body for an even blend. Flows up to 300+hp yet works great as low as 35 hp. Nozzle has a unique faceted spray tip that allows air to pass around the nozzle without disrupting the spray pattern. T-Rex is the highest flowing nozzle available with .110 fuel and nitrous passages that can deliver over 300 hp with a single nozzle. Flow matched fittings allow for the use of any style flare jets currently used in the industry. Solenoid valves are made with Volt-Trap coils for stronger, more efficient power, allows for larger orifice, more flow and works with as low as 9 volts. Plungers are made of high grade alloy with greater tolerances to prevent sticking. The N²O seal is Teflon and a special Viton seal is used for fuel. Dual Taper Jets provide a consistent flow of nitrous and fuel, w/a large array of sizes available. Easy install components such as well nuts to install bottle topside, drill bit and tap for fuel connection, Teflon sealant and easy install Quick-Guide.
	Complete Systems Include:
	Adjustable hp jetting 10lb Wet-Black powder coated bottle Mounting hardware, brackets, bolts, screws, clamps & ties Electrical components, relays, wire connectors, & switches Braided and stainless N²O feed line with Teflon core		T-Rex Nozzle & adapter (up to 300+hp) Chrome Hi-Flo 660 bottle valve w/gauge port Two 22”x-3 braided stainless nozzle lines Quick-Clamp stainless bottle brackets Drill & tap, fittings & sealant Hot-Shot N²O & fuel valves Lifetime Warranty on solenoids 15A WOT micro switch
	Part #	EFI Wet Nitrous Systems	Description
	DEI 110010	4&6 Cyl EFI Wet Nitrous Kit	4&6 Single T-Rex Nozzle, 10 lb Bottle, .080 Hot-Shot Valve, Wet, 35, 50, 75, 100hp Jetting
	DEI 110012	V8 EFI Wet Nitrous Kit	V8 Single T-Rex Nozzle, 10 lb Bottle, .080 Hot-Shot Valve, Wet, 50, 75, 100, 125, 150hp Jetting
	DEI 110015	Mustang S197 (05+) Wet Nitrous Kit	Single T-Rex Nozzle, 10 lb Bottle, .080 Hot-Shot Valve, Wet, 50, 75, 100, 125, 150hp Jetting
	DEI 110005	Bare-Bones EFI Economy Wet Nitrous Kit	Single Raptor Nozzle, 10 lb Bottle, .080 Hot-Shot Valve, Wet, 50, 75, 100, 125, 150hp Jetting

NOTE: Bare Bones Economy system uses the single Raptor Nozzle, not T-Rex Nozzle.

Dry-Trex Systems
Adding a Dry-Trex EFI Dry Nitrous System is one of the easiest and most cost-effective ways to improve performance on any late model EFI vehicle. Dry-Trex nitrous systems feature a single Dry-Trex nozzle with a consistent spray pattern to produce safe horsepower levels for street vehicles. These systems spray nitrous only, allowing a vehicle's computer system to enrich fuel as needed. All systems are dyno-tested on numerous vehicles to insure the most safe and reliable performance.
Complete Systems Include:
Adjustable hp jetting 10 pound Wet-Black powder coated nitrous bottle Brackets, hardware & bolts Switch controls, relay & wiring Braided, stainless lines	Hose, clamps, ties, fittings & sealant Dry-Trex Nozzle and adapter (up to 175+hp) Quick Clamp stainless bottle brackets Easy “Step-By-Step” instruction book Chrome Hi-Flo 660 bottle valve with gauge port Lifetime Warranty Hot-Shot N²O solenoid
Part #	Dry-Trex Systems	Description
DEI 110008	4&6 Cyl EFI Dry Nitrous Kit	4&6 EFI, 10 lb Bottle, Single Dry-Tex Nozzle, 35, 50, 75hp Jetting, Universal System
DEI 110009	V8 EFI Dry Nitrous Kit	V8 EFI, 10 lb Bottle, Single Dry-Tex Nozzle, 50, 75, 100hp Jetting, Universal System

NOTE: Dry nozzles are precision machined from 6061 billet and feature unique 110˚swirl cone pattern. Dry-Trex nozzle is 1/16” npt for most applications.

Dry-Trex Diesel System
Ny-Trex is proud to introduce the next phase of nitrous innovation for the ever-popular diesel market. The Big-Diesel Dry Nitrous System transforms that “black smoke” from performance tunes into horsepower and torque. Ny-Trex systems use only the highest-quality components and are thoroughly dyno-tested on numerous vehicles to ensure the most safe and reliable performance for your diesel.
Complete Systems Include:
Adjustable hp jetting 10 lb Wet-Black powder coated nitrous bottle Brackets, hardware & bolts Switch controls, relay & wiring Braided, stainless lines		Hose, clamps, ties, fittings, sealant Big-Dry Nozzle & adapter (up to 200+hp) Quick clamp stainless bottle brackets Chrome Hi-Flo 660 bottle valve w/gauge port Easy “Step-By-Step” instruction book Lifetime Warranty Hot-Shot N²O solenoid
Part #	Dry-Trex Diesel System	Description
DEI 110037	Big-Diesel Dry Nitrous Kit	Diesel, 10 lb Bottle, Single Big-Dry Nozzle, 50, 75, 100, 125hp Jetting, Universal System

NOTE: Dry nozzles are precision machined from 6061 billet and feature unique 110˚swirl cone pattern. Big-Dry nozzle is 1/8” npt for diesel and big hp.

Bare-Bones Systems
DEI 110005 DEI 110006	The Ny-Trex Bare-Bones Systems use top-quality components and materials, with an emphasis on top performance at affordable prices. These nitrous systems have many of the great features that are also offered in our top-of-the-line systems, and all of them have been thoroughly dyno-tested on numerous vehicles to insure that the safest and most reliable performance is possible at any price. Bare-Bones EFI Economy Wet Nitrous System comes w/the highest quality Raptor wet Nozzle for up to 175hp. Bare-Bones 4150 Economy Spray-Plate System comes w/a laser drilled 4150 billet spray plate for up to 200hp.
	Complete Bare-Bones Systems Include:
	Adjustable hp jetting 10 lb Wet-Black powder coated bottle Hi-Flo 660 bottle valve Bottle brackets Braided stainless lines Switch controls, clamps, fittings & hose Brackets, hardware, bolts Easy “Step-By-Step” instruction sheet Lifetime Warranty on solenoids Raptor wet Nozzle (up to 175hp) OR Bare-Bones 4150 plate (up to 200hp)
	Part #	Bare-Bones Systems	Description
	DEI 110005	EFI Economy Wet Nitrous Kit	4, 6 and 8 cyl EFI, 10 lb Bottle, Black, Raptor 1/16" Wet Nozzle, 50, 75, 100, 125hp Jetting, Universal System
	DEI 110006	4150 Economy Spray-Plate Kit	4150 Holley Square Bore Carburetor, 10 lb Bottle, .080 Hot-Shot Valve, Single Economy Plate, Wet, 75, 100, 125, 150, 175hp Jetting, Universal System
	A Bare-Bones Economy System is just what your car needs - at a price your wallet can afford!

Spray Plates
DEI 150010 DEI 150011	If you're building a nitrous system for a carburated V8, then you'll want one of these N²O spray plates. DEI Ny-Trex Spray Plates are CNC machine manufactured from billet aluminum and anodized for durability. To provide an even blend of nitrous and fuel, spray plates are fitted with spray bars that have laser-drilled holes (the more holes, the better). These single and dual spray plates come in two designs: an 80-hole plate for Holley 4150 style carburetors and a large 96-hole plate for Dominator flange carburetors.		DEI 150012 DEI 150013
	Constructed from 6061 billet aluminum, anodized for durability, fitted with spray bars w/laser-drilled holes. Flow matched fittings allow for the use of any style flare jets currently available in the industry. Laser-drilled stainless spray bars provide more holes for higher horsepower & better distribution.	Single spray 4150 = 80 holes, 400hp Single spray Dominator = 96 holes, 500hp Dual spray 4150 = 160 holes, 600 + hp Dual spray Dominator = 192 holes, 700 + hp
	Part #	Description
	DEI 150010	Single Holley 4150 80 Hole Spray Plate
	DEI 150011	Single Holley Dominator 4500 96 Hole Spray Plate
	DEI 150012	Dual Holley 4150 160 Hole Spray Plate
	DEI 150013	Dual Holley Dominator 4500 192 Hole Spray Plate

Nozzles
DEI 150050 DEI 150040 DEI 150020	These DEI Ny-Trex nitrous oxide nozzles offer a unique and consistent power spray pattern, in turn, providing amazing horsepower increases. They are precision-machined from the finest billet materials and then finished beautifully with either a bright anodized or nickel chrome finish for added durability. The exclusive T-Rex Nozzle, with true blend spray bowl, delivers a swirl cone plume at a 110 degree angle to center the throttle body for an even blend. These Ny-Trex N²O Nozzles can accept all styles and brands of tuning jets that are currently available in today's industry. Nozzles have a unique faceted spray tip to pass air around the nozzle without disrupting the spray pattern. Spray bowl delivers a swirl cone plume at 110° angle to center the throttle body or intake runner for improved effect. These high-flowing spray nozzles come with .110 fuel and nitrous passages that can deliver over 300 hp. Flow-matched fittings allow for the use of any style flare jets that are currently being used in the industry today.		DEI 150041 DEI 110070
	Part #	Description
	DEI 150050	T-Rex Hi-Flo Wet Nozzle
	DEI 150040	Raptor Direct-Spray Wet Nozzle
	DEI 150020	1/8" Big-Dry Spray Nozzle
	DEI 150041	1/16" Dry-Trex Spray Nozzle
	DEI 110070	T-Rex Dual Nozzle Upgrade

Triple-Threat Solenoid Valve System
The DEI Ny-Trex Triple-Threat nitrous oxide solenoid valve system combines purge, nitrous, and fuel solenoids into one easy-to-install component. This N²O system features a precision-machined, billet aluminum, green anodized body with three built-in solenoid valves and volt trap coils for a dependable and clean system. Designed for wet nitrous kits with up to 175 hp, this DEI Ny-Trex Triple-Threat Solenoid Valve System is perfect for most street applications. The unique billet aluminum manifold design combines nitrous, fuel and purge into one easy-to-install component for improved looks and ease of installation. Utilizes a unique mounting system that conforms to any mounting surface. The "Volt-Trap” coil design implements a suppression diode to minimize coil saturation and keep voltage flow in one direction to improve efficiency. Fuel is cooled by the relationship of the nitrous passing through the billet valve body as the fuel also passes through.
Part #	Description
DEI 140010	Triple-Threat Purge Fuel Solenoid Valve System

Hot-Shot Solenoid Valves
	DEI Ny-Trex Hot-Shot nitrous oxide solenoids include three system types: nitrous, fuel and purge. They feature a proprietary seal material, along with a special plunger design that will stand up to the rigors of pulsing. DEI Ny-Trex Hot-Shot solenoids have been specifically designed for use in nitrous oxide systems. These electric solenoids utilize a diode so the current can only flow in one direction, helping them to quickly remove unwanted air or vapor from the nitrous oxide feed lines and and reduce the amps needed to operate the valve - even under the hottest conditions. Valves flow up to 175 hp of nitrous 1/8” inlet and outlet ports The valves are made with strong and efficient Volt-Trap coils that allow for larger orifice. More flow and will work with as few as 9 volts Plungers are made of high-grade alloy with greater tolerances to prevent sticking The N²O seal is Teflon and a special Viton seal is used for the fuel All solenoids come with a LIFETIME WARRANTY
	Part #	Description
	DEI 140012	Hot-Shot Nitrous System Solenoid Valve
	DEI 140013	Hot-Shot Fuel System Solenoid Valve
	DEI 140014	Hot-Shot Purge System Solenoid Valve

Phat-Shot Solenoid Valves
DEI Ny-Trex Phat-Shot nitrous oxide solenoids feature proprietary seal material, along with a special plunger design that will stand up to the rigors of pulsing. These nitrous oxide solenoids feature a 0.125 in. orifice with Teflon plungers and fuel valve is .250 orifice with high grade viton seal. These Phat-Shot valves have been specifically designed for use in nitrous oxide systems, and are used for a wide range of nitrous systems(100-600 hp+). The valves also use a special diode so that the current can only flow in one direction, helping them to quickly remove unwanted air or vapor from the nitrous oxide feed lines and and reduce the amps needed to operate the valve - even under the hottest conditions. Valves flow up to 300 hp of nitrous Stainless bodies, special plunger and diode designs 1/4” inlet and 1/8” outlet side ports Nitrous oxide valve features a 0.125 in. orifice with Teflon plungers Fuel valve is .250 orifice with high grade viton seal All solenoids come with a LIFETIME WARRANTY
Part #	Description
DEI 140030	Phat-Shot Nitrous System Solenoid Valve
DEI 140035	Phat-Shot Fuel System Solenoid Valve

Split-Shot Solenoids Valves
	DEI Ny-Trex Split-Shot solenoids combine large-diameter orifices capable of delivering over 700 hp. Their proprietary plunger and coil design allows the valves to operate at an unbelievably low 3.2 amp usage, even under extreme temperatures. Split-Shot solenoids are the only valves on the market that come with dual outlets and a purge port, which alleviates the need for Y-blocks and delivers a more uniform and predictable nitrous shot. The valves feature a Hi-Flo design that uses a unique plunger to reduce internal pressure and allow for increased orifice size (.180), greater bottle pressures (up to 1,250 psi) and deliver up to 700hp of nitrous (with as little as 3 amp current draw). Valves flow up to 700hp of nitrous. Uses 1/4" ORB fittings, utilizes O-ring style inlet/outlet fittings for quick change or service. Has single inlet with dual outlet for direct port, dual nozzle or dual plate applications. Integrated purge port adds additional purge valve or 2nd stage valve. All solenoids come with a LIFETIME WARRANTY
	Part #	Description
	DEI 140050	Split-Shot Nitrous System Solenoid Valve
	DEI 140055	Split-Shot Fuel System Solenoid Valve

Bottles, Gauges & Accessories
Ny-Trex bottles, gauges and accessories are made from quality materials and are meticulously tested to perform at highest possible levels.
Part #	Description
DEI 120040	Accu-Pressure Bottle Heater
DEI 120045	Mica - Band Bottle Heater Element
DEI 120051	10 lb. "Wet Back" Hi-Flo Bottle
DEI 120055	5 lb. Brushed Hi-Flo Bottle
DEI 120056	16 oz. Brushed Hi-Flo Bottle
DEI 120060	660 Hi-Flo Valve w/Gauge Port
DEI 120064	660 x - 4 Stainless Bottle Nut
DEI 120065	660 Bottle Nut Washer (Nylon)
DEI 120066	660 x -6 Bottle Nut
DEI 120068	660 x -8 Stainless Bottle Nut
DEI 120090	NHRA Blow Off Fitting
DEI 120091	NHRA Blow Off Disk - 3000 PSI
DEI 120092	Blow Down Tube
DEI 120095	B-Valve Remote Bottle Opener
DEI 125015	Liquid Filled Bottle Gauge (1½" 0-1500 PSI)
DEI 125041	Dual Gauge Port - 4 x 1/8 NPT
DEI 125043	Blue -4 Swivel Gauge Port
DEI 130030	Quick Clamp Stainless Bottle Bracket Set

Accu-Pressure Bottle Heater System
	Keep your bottle in the “sweet spot” with the Ny-trex exclusive Accu-Pressure Bottle Heater System. This system features a unique Mica-Band heating element capable of heating a bottle in half the time of traditional silicone blanket-style heaters. The bottle temperature can be controlled by an adjustable pressure switch, while most other standard systems use a less-accurate temperature switch. This bottle heating system will easily slide over any 10 pound Ny-Trex nitrous bottle and can be controlled by a pressure transducer switch (sold separately, product # DEI 165045). This system comes complete with a quick disconnect feature along with switches, relay, fittings, wire, connectors and easy-to-follow instructions.
	Part #	Description
	DEI 120040	Accu-Pressure Bottle Heater System

B-Valve Remote Bottle Valve Opener
The B-Valve Remote Bottle Valve Opener will open your Ny-Trex nitrous bottle with just the flip of a switch. This remote valve can attach directly to the bottle, or it can be remotely mounted. Unlike other solenoid-style openers, this is the only opener that is full flow with a 0.250 orifice. Most remote openers require you to remove the handle and mount a window motor to a collar to turn the valve open (causing a great deal of work to replace and fill a nitrous bottle). For easy removal and filling, the Ny-Trex B-valve simply disconnects with feed line.
Part #	Description
DEI 120095	B -Valve Remote Bottle Valve Opener

Prime Time Show Purge Kits
DEI 110086 DEI 110085 DEI 110080 DEI 110091	Be the envy of the nitrous world with a complete Ny-Trex Prime Time Show Purge Kit. These nitrous oxide purge kits will eliminate the lag time caused by vapor accumulation in the supply line. They include a 3 ft. roll of annealed aluminum tubing along with a -3AN blue aluminum flare nut and sleeve, a purge valve, a push button switch, and mounting hardware. Easily make sure your nitrous feed lines are free of air and vapor with one of these DEI Ny-Trex purge kits. All kits come complete with necessary hardware, braided stainless lines and a 10 lb. nitrous bottle for complete and easy install.
	Kits Include:
	Fuel pressure safety switch V-spray purge block Purge system	Accu-pressure bottle heater system Liquid filled bottle gauge Gauge port
	Part #	Description
	DEI 110086	Prime-Time Show Nitrous Purge Kit
	DEI 110085	V-Spray Nitrous Purge Block
	DEI 110080	Nitrous Vapor Purge Valve Kit
	DEI 110091	Nitrous Pro-Accessories Kit

Bottle & Solenoid Brackets
DEI Ny-Trex nitrous bottle brackets are designed to securely mount your nitrous bottle. They fit 7 inch 10 and 15 pound Ny-Trex nitrous bottles and feature a special quick-clamp for fast and easy removal/mounting of your nitrous bottles. Made from durable stainless steel or billet aluminum, Ny-Trex bottle brackets will keep your nitrous bottle from moving under hard acceleration and deceleration. A Ny-Trex replacement nitrous bottle bracket quick-release handle is also good to have around just in case you need a spare for your Ny-Trex mounting bracket system.
Part #	Description
DEI 130010	Single Billet 10 & 15 lb. Bottle Bracket
DEI 130015	Billet Aluminum Bottle Bracket Handle
DEI 130020	Dual Billet 10 & 15 lb. Bottle Bracket
DEI 130030	10 lb. Bottle Quick-Clamp Stainless Bottle Bracket Set
DEI 130033	Universal Billet Aluminum Solenoid Valve Mounting Bracket
DEI 130035	Billet Aluminum Solenoid Valve Mounting Bracket

Electrical Switches
DEI 165028 DEI 165030 DEI 165033	Part #	Description	DEI 165035 DEI 165040 DEI 165045
	Below are a variety of DEI Ny-Trex electrical switches that can be used for many different things. Whether you need a button for your purge valve, or to activate your nitrous system, these Ny-Trex electrical switches are a great choice for your nitrous system. For example, the Aircraft Safety Arming Switch is designed to arm your nitrous system before hitting an activation button. It features blade-type terminals for quick and easy wire installation as well as a flip-up carbon fiber safety cover that, when flipped down, keeps the switch from being accidentally armed. Or, the Wide Open Throttle (WOT) Micro Switch can be used to turn on your nitrous system at wide-open throttle to ensure that your vehicle is getting the right amount of fuel when you are ready to add nitrous oxide to the mix.
	DEI 165028	Aircraft Safety Arming Carbon Fiber Switch
	DEI 165030	Red Momentary Push Button Switch
	DEI 165033	EFI Fuel Pressure 30 PSI Safety Switch
	DEI 165035	Carb Fuel Pressure 5 PSI Safety Switch
	DEI 165040	Wide Open Throttle (WOT) 15A Micro Switch
	DEI 165045	Adjustable Bottle Pressure Transducer Switch

Stainless Braided Hose Line
	DEI Ny-Trex stainless steel braided hoses are Teflon-lined, factory assembled, and available in many lengths. These feed lines come with blue (nitrous) or red (fuel) anodized aluminum ends to provide easy, secure plumbing for your nitrous and fuel line needs.
	Part #	Feed Line Description	Part #	Nozzle Line Description
	DEI 175039	- 4 x 2" Blue Feed Line	DEI 175030	- 3 x Blue Nozzle Line
	DEI 175040	- 4 x 12" Blue Feed Line	DEI 175031	- 3 x 16" Blue Nozzle Line
	DEI 175041	- 4 x 18" Blue Feed Line	DEI 175032	- 3 x 12" Blue Nozzle Line
	DEI 175043	- 4 x 3' Blue Feed Line	DEI 175033	- 3 x 7" Blue Nozzle Line
	DEI 175044	- 4 x 14' Blue Feed Line	DEI 175035	- 3 x 22" Red Nozzle Line
	DEI 175046	- 4 x 16' Blue Feed Line	DEI 175036	- 3 x 16" Red Nozzle Line
	DEI 175048	- 4 x 18' Blue Feed Line	DEI 175037	- 3 x 12" Red Nozzle Line
	DEI 175065	- 6 x 16' Blue Feed Line	DEI 175038	- 3 x 7" Red Nozzle Line
	--	--	DEI 175058	- 4/- 3 x 7" Blue Hi-Flo Nozzle Line
	--	--	DEI 175059	- 4/- 3 x 7" Red Hi-Flo Nozzle Line

Accessories
Part #	Description	DEI 199045 DEI 125041 170011/12/13 DEI 170050 DEI 170022 DEI 150054 DEI 165020 DEI 165021 DEI 190016	DEI 199046 DEI 125043/ 63 DEI 170014 DEI 170047 DEI 170048 DEI 170060/ 61 DEI 150055 DEI 170059 DEI 165031 DEI 165050 DEI 190023
Filters:	If you are installing a DEI Ny-Trex nitrous oxide system, then you will want one of these nitrous oxide filters. The filters come in large and small, are manufactured from aluminum billet, and feature a bronze-sintered core that filters down to 50 microns. With a Ny-Trex N²O filter, your vehicle will be able to maintain a pure nitrous flow for consistent horsepower.
DEI 199045	Large Nitrous Filter 1/4" NPT, Bronze Sintered, 50 Microns
DEI 199046	Small Nitrous Filter 1/8" NPT, Bronze Sintered, 50 Microns
Fittings, Blocks, Swivel Adapters:	Ny-Trex nitrous pressure gauge fittings, blocks and swivel adapters come in a many sizes and styles. The nitrous fittings allow a nitrous pressure gauge to be installed anywhere inline. The accessories below are made from stainless steel or aluminum for high strength, light weight and corrosion resistance. All have NPT ports so a nitrous pressure gauge can be threaded directly to them.
DEI 125041	- 4 x 1/8" NPT Inline Dual Gauge Port
DEI 125043	- 4 Swivel 1/8 NPT Blue Gauge Port
DEI 125063	- 6 Swivel 1/8 NPT Blue Gauge Port
DEI 170011	-3 x 1/8" NPT Male Adapter
DEI 170012	- 4 x 1/8" NPT Male Adapter
DEI 170013	- 4 x 1/4" NPT Male Adapter
DEI 170014	1/8" NPT Close Nipple
DEI 170050	1/8" NPT "Y" Blocks
DEI 170047	- 4 Swivel 90 Adapter
DEI 170048	- 4 Swivel Tree Adapter
Fuel Adapters:	DEI Ny-Trex fuel adapters are designed to fit your stock return lines and fuel rails. Made of billet aluminum, these adapters are the easiest way to hook up to an existing fuel supply. They use a factory spring-lock design with an AN sized outlet made specifically for a braided stainless steel hose. Hook up your fuel pressure gauge the right way with a Ny-Trex fuel rail fitting adapter.
DEI 170022	- 4 x 1/16" NPT Fuel "Jump" Fitting
DEI 170060	S197 (05+) Ford Fuel Line Adapter
DEI 170061	GM/Dodge Fuel Rail Adapter
Nozzle Fittings:	Is your nitrous nozzle diameter too large? No problem. You can make the right-size nozzle work for your intake manifold with one of these DEI Ny-Trex nitrous nozzle adapter fittings. These DEI Ny-Trex nitrous nozzle adapter fittings will reduce your nozzle size NPT, are manufactured from aluminum billet and will hold up under high manifold pressures.
DEI 150054	1/16" Nozzle Adapter Fitting
DEI 150055	1/8" Nozzle Adapter Fitting
DEI 170059	1/4" x 28 Nozzle Jet Fitting
Electrical Wires & Switches:	These electrical accessories feature a quick, simple hookup that will save you time and improve your vehicle's durability and appearance. Use the multi-colored DEI Ny-Trex relay harnesses for an easy, direct connect to multiple groups of relays. Or, you can install a heavy duty relay, push button or adapter switch to protect both your nitrous and electrical system.
DEI 160020	Relay Wire Harness
DEI 160021	40 amp Relay Switch
DEI 165031	Remote Cord Push Button Switch
DEI 165050	Cigarette Lighter Adapter w/Switch
Pipe Taps:	DEI Ny-Trex thread pipe taps allow you to thread a drilled hole to a specific thread size. Made of durable steel, they are available in 1/8 in. NPT or 1/16 in. NPT thread sizes. Put threads where you need them with one of these thread chasing pipe taps.
DEI 190016	1/16" x 27 NPT Pipe Tap
DEI 190023	1/8" x 27 NPT Pipe Tap

Flare Jets
DEI Ny-Trex nitrous flare jets allow you to adjust the power level on your nitrous oxide kit to produce impressive power gains. Made of durable brass, all of these flare jets are laser drilled for precise metering and feature a dual taper design that allows for even flow. They can be used in either the fuel or nitrous lines and are available in many different sizes to suit virtually any horsepower needs.
Laser drilled for precise metering Dual taper design for even flow Available in .012" to .116" sizes to suit virtually any horsepower	3/16" stem for larger hp applications Can be used in both fuel or nitrous lines Packaged individually
*Properly jetting any type of nitrous system cannot be overemphasized! The failure to correctly jet your nitrous system can result in catastrophic damage to your vehicle's engine, as well as your nitrous system.
Part #	Description
DEI 155012	.012" Flare Jet
DEI 155014	.014" Flare Jet
DEI 155016	.016" Flare Jet
DEI 155018	.018" Flare Jet
DEI 155020	.020" Flare Jet
DEI 155022	.022" Flare Jet
DEI 155024	.024" Flare Jet
DEI 155026	.026" Flare Jet
DEI 155028	.028" Flare Jet
DEI 155031	.031" Flare Jet
DEI 155032	.032" Flare Jet
DEI 155033	.033" Flare Jet
DEI 155034	.034" Flare Jet
DEI 155035	.035" Flare Jet
DEI 155036	.036" Flare Jet
DEI 155038	.038" Flare Jet
DEI 155040	.040" Flare Jet
DEI 155041	.041" Flare Jet
DEI 155044	.044" Flare Jet
DEI 155046	.046" Flare Jet
DEI 155048	.048" Flare Jet
DEI 155052	.052" Flare Jet
DEI 155057	.057" Flare Jet
DEI 155062	.062" Flare Jet
DEI 155067	.067" Flare Jet
DEI 155073	.073" Flare Jet
DEI 155082	.082" Flare Jet
DEI 155088	.088" Flare Jet
DEI 155093	.093" Flare Jet
DEI 155099	.099" Flare Jet
DEI 155110	.110" Flare Jet
DEI 155116	.116" Flare Jet

Flare Jet Assortment Packs
	As noted above, DEI Ny-Trex Flare Jets are laser drilled for precise metering and feature a dual taper design to allow for even flow. These flare jets are made from the finest brass materials and each one is meticulously tested to perform at the highest level possible. Laser drilled for precise metering Dual taper design for even flow Can be used in both fuel or nitrous lines 3/16" stem for larger horsepower applications Assortment sets of 24, 50 and 100 Carrying case included
	Part #	Description
	DEI 155001	Jet Pack 1 - 24 Assortment 2 Each - Sizes 18, 20, 24, 31, 33, 35, 41, 52, 57, 62,67, 73
	DEI 155002	Jet Pack 2 - 50 Assortment 2 Each - Sizes 14, 16, 18, 20, 22, 24, 26, 28, 31, 32, 33, 35, 38, 40, 41, 44, 48, 52, 57, 62, 67, 73, 82, 88
	DEI 155003	Jet Pack 3 - 100 Assortment 4 Each - Sizes 14, 16, 18, 20, 22, 24, 26, 28, 31, 32, 33, 35, 38, 40, 41, 44, 46, 48, 52, 57, 62, 67, 73, 82, 88

Nitrous Trans-Fill System
The DEI Ny-Trex Nitrous Trans-Fill System comes complete with a double-ended nitrous pump, digital scale and controller, portable tray, braided stainless lines and filter. Portable Tray is made with heavy gauge steel and powder coated for protection and great looks. This tray makes track-side filling a breeze! 100 lb. Scale has a precision strain gauge for accuracy (+/0.02 oz) and protected with a hard rubber coating to handle the abuse of heavy traffic. Digital Scale Controller is easy to read and capable of both metric and pounds. Also has Zero and Tare weight functions (9 volt battery is included). Momentary Drive button insures constant operator attention for safety. Economizer Valve relieves pressure to small cyl. while maintaining nitrous in pump to minimize waste. Hand-Wheel nursing cylinder connector allows easy hook up without tools. Braided Stainless inlet/outlet lines are rugged to provide years of care-free service. Double-Ended Pump design uses 50-70% less air than competitor’s single-ended style pump and delivers up to 8 lbs. per minute without the need to chill the bottle.
*Just in case your pump goes bad, a Ny-Trex replacement filling pump is available below. This filling pump can transfer nitrous to your bottle within a minute or two and is designed to work with your existing nitrous oxide system, so there is no need to change your feed lines or custom-wire them before using.
Part #	Description
DEI 110042	Nitrous Trans-Fill Station
DEI 110040	Nitrous Filling Pump Only

Click Here To Return

To KMJ eBay Store