PARKER PUSH-LOK GENERAL PURPOSE
Parker Push-Lok is the performance
standard for a multitude of applications. It is manufactured to the
same rigorous standards as all of Parker’s products. This hose performs
well when used within the temperature and pressure parameters that it
was designed for.
250 psi. maximum pressure
most oil, water and fuel applications.
Synthetic rubber tube is
with one layer of textile braid, combined with an outer layer of
synthetic colored rubber.
Temperature range –40° F to
Sized in fractions and may be
with any push-on style fitting.
Tip: To ease the installation of any push on
hose end, first dip the end of the hose in boiling water to soften it
slightly (a heat gun also works well). Clamp the hose in a vise and oil
the barbs with common motor oil. Push the hose over the barbs with one
FRAGOLA PUSH-LITE GENERAL PURPOSE HOSE ENDS
best requires Fragola Series 8000 Push-Lite race hose.
Fragola Performance Systems takes hose just as seriously as it takes
hose ends. Series 8000 Push-Lite race hose is manufactured to the
highest aerospace-quality standards for years of trouble-free service,
even under high pressure. The difference is the lighter weight of an
inner layer of synthetic rubber reinforced with fiber braid and wrapped
with a weather-resistant textile cover. Series 8000 Push-Lite race hose
from Fragola has a 250 psi maximum working pressure that is compatible
with most automotive water, oil, and fuel systems, making Push-Lite
hose an ideal alternative when considering cost or weight. Fragola
Series 8000 Push-Lite race hose is made in the USA in assorted sizes
and lengths to perfectly fit your application.
to the top
Series Push-Lite may be used in any number of automotive applications.
If you are using fittings other than our 8000 Series Push-Lite Hose
Ends, be sure to measure the hose barb diameter to determine the
suitability. This hose is sized fractionally, but the suitability is at
the sole determination of the end user.
Tip: To ease the installation
of any push on hose end, first dip the end of the hose in boiling water
to soften it slightly (a heat gun also works well). Clamp the hose in a
vise and oil the barbs with common motor oil. Push the hose over the
barbs with one smooth movement.
| 20 FT.
||28 in. hg.
||28 in. hg.
||15 in. hg.
FPS Series 3000 Race Hose is
to the highest aerospace-quality standards for years of trouble-free
service even in the most demanding circumstances.
500-1500 psi. working pressure
all of the oil, water and fuel systems you may encounter.
Two layers of rugged woven
Inner layer resists collapse and
outer layer protects abrasion.
Unique CPFE inner liner is
with all hydrocarbon and alcohol based fuels, along with synthetic and
natural based lubricants.
Operating range of –40° F to
As a rule of thumb when selecting an
hose to replace a given size automotive hose, the dash size is the
nominal size in 1/16". Example: -10, is 10/16" or equivalent 5/8"
automotive hose. The A-N hose will be slightly smaller due to the wall
thickness of the hose.
These ends differ from the Series 3000 Hose Ends in the
that they feature the “single nipple” method of hose attachment. With
the “single nipple” style, the socket draws the hose over a long
tapered single nipple. The sealing feature is the crush of the hose
between the inside of the socket and the outside of the nipple. With
this style of hose end, reusing it is a breeze. There is no sliver of
cut hose to remove before reinstalling the hose end on a new piece of
hose. It is only available in two color combinations, with traditional
red and blue being standard.
FITTINGS AND ADAPTERS
Fragola Aluminum Adapters and Fittings may look like
devices, but Fragola takes them very seriously. They have
spent several years researching, testing, and re-testing to perfect
what they feel are the finest adapters and fittings available.
FITTINGS AND ADAPTERS
FITINGS, ADAPTERS, AND HOSES
Carburetor, and Fuel
Power Steering systems pose their own unique set of problems, and the
best way to manage the power steering system is with the FPS Power
Steering Hose and Fittings. The special zinc plated steel
fittings are easily assembled, and re-usable
Lightweight aluminum tubing for nitous lines, fuel lines, and water
lines. Simply flare to 37° and install an AN nut with AN
sleeve. All tubing is easy to work 3003 Aluminum, with .035"
for Brake Light Switch
|| -3 tee 1/8 FPT on the side
|| 5/8ID EA for 919, 967
|| 9/16ID EA for 919, 966,
|| 7/8ID EA for 919, 975, 976